Posted by Gone are those days when you kept on begging your mum to style patches within your girl’s scout sash or that dull old denim jacket. Patches are used to glamorize your good old ragged clothes into the happening ones. Through these little add-ons, your daily wear apparel can be lit, and surly steal the glance of spectators. It is a communication, through which the aesthetic realm speaks, and evokes the hidden charisma of a true personality.
What are iron-on patches?
Iron on patches is machine embroidered badges that have a thin layer of plastic at the backside. That thin layer is a rigid glue, which is activated when it is pressed on with heat. Basically, this sleek layer works when the iron is pressed hard on it, and the melted plastic sticks on the surface (whatever you have provided).
If you are thinking about it, what are the options in the category? Then prepared to be overwhelmed kiddos! Because in this genre, the sky is your limit. Whatever you can imagine, can be made on a patch. Wondering about Black Sabbath? We have that too.
The DIY project
There are a number of patches in the fashion hub! It’s totally up to you whatever you like, choose that away. But, the only thing that must be kept in mind, you should choose those blotches that suits your need. For instance, there are Velcro patches, iron-on patches, stick-on patches, and embroidered patches, pick away whatever entices you!
The patch that is easy to in the Do-it-Yourself category is none other than, iron-on coverings. It is easy, you can do it at home effortlessly, requires no fancy equipment, and no hefty amount attached to it. The best category in terms of quality are many, but, precisely we will focus on Bespoke Patches in the category of iron-on.
Step-by-step guide
Step 1
First, you have to determine the surface, what flat surface you are using? For instance, we will talk about a simple t-shirt. A T-shirt is a commonly used clothing piece, all you have to do is to look at the manufacturer’s label. If it is permissible to tolerate the iron heat, what temperature can this texture hold? You cannot stick iron-on patches on a silk shirt, or in satin. Whereas, cotton, denim, or polyester hoodies are the safe and best bet.
Step 2
In this step, you will set your iron temperature. The setting ideally is 270℉ which is the highest setting on an iron used commonly in the house. This hotness level is also indicated as “cotton” on some iron options. So choose whatever option pop between the two mentioned above.
Step 3
Next, figure out where you want exactly to place the patch. In this step, you may need help with measuring tape, and tailor’s chalk. For instance, if you need the badge in the center of your t-shirt/hoodie, you need an exact measurement. Through measuring tape measure the center point, and mark that with chalk. In this manner, your patch won’t be ill-measured.
Step 4
Once you have marked the spot, where you want to stick it. Pre-press that area, doing this will remove wrinkles, and omit any build-up. Now you have a flat, straight surface to initiate the next step.
Step 5
Place the patch back on the spot where you want them to be placed. In some cases, the patches slip, so people use pins to intact the space. But, be sure to remove it before using the iron.
Step 6
Use a pressing cloth, and if you don’t have one, try to use a thin cloth or a towel. Flat pressing cloth over the blotch and the surrounding fabric.
Step 7
Pressing time varies from covering to covering. Generally, it takes 12 seconds to firmly press the iron on the patch. If you see it needs more time, exceed that to 30 seconds not more than that. Don’t move the iron, the heat should be spread uniformly in one direction, without any shift.
Step 8
Finally, your fabric is ready, but one additional step is to iron the inside/backside of the cloth too. Through this stride, your patch can be fully secure, by pressing it for another 30 seconds, will seal it more intensely.
Tips and tricks
- If there is no pressing cloth, then a simple silicone-based parchment works too.
- custom iron on patches UK is widely used by teenagers and youngsters. This augments the look of lackluster plain jeans.
- Putting a heavy weight on the recently pressed cloth can be an added benefit.
- If your favorite t-shirt has some rag, hole, or stain, use patches to add style, and to cover that too.
- Patches add panache to your glitzy personality.
- The iron-on patches are fragile when pressed directly without any protection, so always use a handy cloth or mentioned things above.
- Velcro patches need more care, so don’t try to overuse them.
Patches: a snazzy component
Patches were in absolute rage when the circa the 80s hit the hippies. Those rock bands, rip-apart collars, and ragged jackets were all the hip attributes. This was the time when the patches comes claim to fame. From this rocking age till now they are in demand, without any delay. In fact, it wouldn’t be wrong if we say, they take a sabbatical from the fashion industry, and return even much stronger. So hop onto your parent’s treasure chest, or an older sibling’s stash, and un-discover the hidden gem.
Final thoughts
The iron-on patches are one of the coolest things invented by the clothing industry. They simply elevate the style and the personality of any character. Any old scruffy fabric can turn into a striking fashion article, just like how the fairy Godmother turns Cinderella into a princess. These amazing blotches are easy to buy, easy to apply from the comfort of your home, and are accessible and diverse. The usage is not restricted to t-shirts, denim, and jeans. Even purses, tote bags, hats, and backpacks can be decorated by these little ornamental figures.